Skip to main content
605Buzz
Today Search Corrections Following About Join waitlist

public-safety

Road work: fresh oil listed on SD-20 from Sept. 2, 2026

The South Dakota Department of Transportation lists Road work: fresh oil at SD-20 from Junction South Dakota 45 South to 10 miles west of Junction South Dakota 37 North-Conde, with a listed start of Sept. 2, 2026.

605Buzz Added Record date Last ledger entry

Published automatically from public-record data — not yet reviewed by an editor.

Key facts

What
Public safety
When
Record date Sept. 2, 2026; Added Sept. 6, 2026
Source
Road work and restrictions
Read time
About 1 minute

How this desk works (below the article)

SD-20 near Conde is scheduled for fresh oil in both directions.

The state transportation department describes the work this way:

The following road construction project is in progress: fresh oil with delays 15 minutes, flaggers, lanes reduced to 1, no passing, pilot car, speed limit 30 mph, traffic routed to opposing lanes, and truck speed limit 30 mph Monday through Friday between 6:00 AM and 6:00 PM until further notice. For information or questions about a construction project, please find contact information for our SDDOT Area Offices at:

The listed work zone runs from the South Dakota 45 South junction to 10 miles west of the South Dakota 37 North junction at Conde, near milepost 311. The work is listed from 10:42 a.m. MDT (11:42 a.m. CDT) Wednesday, Sept. 2, 2026, with no end date, which is how work scheduled until further notice is listed. The listing does not say which time zone applies, so both are given.

The project has its own page: dot.sd.gov/inside-sddot/region-area-offices/region-area-offices.

Plans change with weather and crews' progress; the South Dakota Department of Transportation has the latest at SD511.

See something wrong? How corrections work — every correction ships with a diff + timestamp.

How this desk works

Where this comes from

This listing comes from the South Dakota Department of Transportation's public traveller information, served through its vendor's content network. Neither host publishes a robots.txt or terms-of-use page, so no access directive exists either way; the department's own fields are reproduced with attribution, and no licence is claimed that nobody granted.

How the times are shown

The department publishes start and end as numeric timestamps, so each is shown as a clock reading in both of South Dakota's zones.

How the status is decided

Whether work is currently underway is not written into the article text, deliberately: it depends on when you are reading. It is worked out from the listed dates each time the page loads rather than stored as an answer that would go out of date without anyone noticing. The status at the top of the page is that calculation, not a claim the department made.

The department's description is put into plain words by fixed rules only: its standard opening line is replaced, times and dates are written the way people say them, and direction words lose their capitals mid-sentence. Nothing is added, and every number, place and time it gives is kept; a description in a shape those rules were not written for is quoted exactly as published. A detail inside it can be superseded without the surrounding fields changing.

Email me when this record changes

These records are re-read on a schedule. Pick something this record states, and you'll hear when it is corrected or the filing behind it is amended — and when any other published record states that same value under that same field, whichever body published it.

What would you like to follow?

Alert email is not switched on yet. Picking one of these below saves it as pending; when sending starts you'll get one message asking you to confirm it, and nothing at all until you answer that. You can follow a road, a town, a permit number or an employer — never a person's name or a street address. What following means · Privacy notice

Search every article ever published.